Professional Manufacturer of Nitrogen Generator & Oxygen Generator

phone icon
product list banner

Products

Product Display

Generator Informations

Oil-free Nitrogen Booster from China factory

Oil-free Nitrogen Booster

Oil-free Nitrogen Booster, also known as nitrogen booster pump, or nitrogen booster valve, is a machine used to booster nitrogen, it belongs to the category of pneumatic booster pump class of products, belongs to the reciprocating booster pump, different from the plunger pump, it is classified as a pneumatic piston booster.

Product Description

Oil-free Nitrogen Booster, also known as nitrogen booster pump, or nitrogen booster valve, is a machine used to booster nitrogen, it belongs to the category of pneumatic booster pump class of products, belongs to the reciprocating booster pump, different from the plunger pump, it is classified as a pneumatic piston booster.

The working principle of an Oil-free Nitrogen Booster from China factory is to use the area ratio to form the pressure difference, through the small force of the large piston to make the small piston generated by the high-pressure nitrogen for output. The high-pressure end of the nitrogen through the direction of the high-pressure check valve to control its output.

Nitrogen is an inert gas, and more than half of the air content is nitrogen, so the development of a nitrogen booster, for the nitrogen machine, nitrogen cylinder pressure boost, or filling provides a very convenient filling booster tool.

The use of nitrogen is very wide, such as in the automotive, aviation, laboratory, medical, factories, etc. have a wide range of applications, then also reflects the nitrogen booster in the above areas, especially for nitrogen has a high-pressure demand inseparable. Then its range of applications can be mentioned in the following areas.

  • Accumulator nitrogen filling.
  • Nitrogen power source for nitrogen circulation and protection system.
  • Laboratory high-pressure nitrogen charging reactor to assist simulation experiments.
  • High-pressure nitrogen filling for aircraft tires such as automobiles.
  • Nitrogen is a high-pressure booster in the firefighting industry to promote the spraying of chemicals.
  • Mold industry gas-assisted injection molding industry above high-pressure gas-assisted injection molding use.
  • A typical application of physical foaming of electric wire and cable.
  • Gas tightness test and replace helium for leak detection.

The characteristics of high-quality China nitrogen boosters are as follows: wide range of output pressure, excellent applicability, flexible application, easy pressure adjustment, safe operation, simple maintenance, long service life, etc.

Related Category

FAQ

How to extend the service life of nitrogen generator?

Nitrogen generators are used in many industries, such as petrochemical, coal chemical, natural gas chemical, heat treatment, bright annealing, protective heating, green grain storage, food nitrogen-filled packaging, vegetable preservation, wine sealing (canning) and preservation, etc. . If the nitrogen generator ...

Read More

What are the routine maintenance of nitrogen system?

Daily maintenance of air compressor: (1) Drainage of oil and gas drums: Open the drain valve of oil and gas drums a little before starting the machine to drain the condensed water during shutdown, and close it immediately when there ...

Read More

How to maximize the working efficiency of the nitrogen generator?

1. Before using the nitrogen generator, the user needs to read the nitrogen generator operating manual carefully and accept the operation training from the manufacturer. 2. The installation site of the nitrogen generator should be reasonable and should not be ...

Read More

What are nitrogen and helium used for in aerospace?

Gases that are heavily used in modern rocket and aerospace technology are nitrogen and helium. Their main applications are: 1. As an energy source, it is used to operate various pneumatic valves and components (helium gas should be used to ...

Read More

How to choose the installation site of nitrogen generator?

The selection of the installation site of the nitrogen generator is the most neglected by the staff. Often after the nitrogen generator is purchased, a place is found at will, and it is used immediately after piping, without any prior ...

Read More

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

What is 7+4?

Related Products

What is 7+4?