Professional Manufacturer of Nitrogen Generator & Oxygen Generator

phone icon
product list banner

Products

Product Display

Generator Informations

Online Oxygen/Nitrogen Analyzer

Online Oxygen/Nitrogen Analyzer

China's high-quality Oxygen analyzers from manufacturers are critical for technology professionals and engineers. These tools help them monitor and manage the level of oxygen in a wide range of environments like smokestacks, tanks, and offices. They also help improve safety in the workplace.

Product Description

What is an oxygen analyzer?

China's high-quality Oxygen analyzers from manufacturers are critical for technology professionals and engineers. These tools help them monitor and manage the level of oxygen in a wide range of environments like smokestacks, tanks, and offices. They also help improve safety in the workplace.
Oxygen analyzers are used to measure stack gas or inert gas because the concentration of these gases can vary from unit to unit (for example, different manufacturers use different equipment to measure oxygen).
Oxygen analyzers from suppliers are typically used in a wide range of industries including technology, healthcare, chemical, and pharmaceutical industries. But they are also increasingly being used in commercial buildings where they monitor ventilation systems and provide information that is used to improve indoor air quality.

The benefits of using an oxygen analyzer

It’s been said that oxygen is the most important thing in combustion, and the most important thing in life. To be more precise, oxygen is a component of air (a gaseous medium), and it is a basic component of life. Oxygen is essential for all living beings, including humans. It’s used to power reactions such as photosynthesis, or to maintain human health and wellbeing. Oxygen analyzers measure the amount of oxygen present in a given environment.

Oxygen analyzers are used in two main ways:

1) They are used to measure either stack gas or inert gas (i.e., from a combustion engine). Stack gas analyzers measure the amount of oxygen found within the exhaust stream after combustion. Inert gas analyzers measure the amount of carbon monoxide in the exhaust gas after combustion.
2) They are used to monitor air quality and environmental pollution levels by monitoring concentrations of various gases in air samples from different points within a given area.
The following table helps explain these two uses:
Oxygen analyzers have numerous functions but they are more popular as air quality sensors than as industrial equipment because they are not very expensive and can be easily integrated into almost every industrial process with few changes to its design. However, there are some drawbacks associated with them that must be considered when choosing an oxygen analyzer for your application:
1) Air quality sensors usually use both stack gas and inert gas which can cause problems if you want them to work well on one type of material only while they won’t work on another type (for example, you may have to install an inert-gas detector on one side but not another). Another drawback is that some oxygen sensors can only measure ambient levels of dissolved gases such as CO2 or NOx which may not be suitable for your particular application (for example, if you are running a chemical plant). Another problem with using only stack-gas monitors is that it is impossible to use one over another because there would be no way to differentiate between them as they both produce similar results (although there are ways around this problem; see below).
2) Creating data reports means that we have relatively low-resolution images at our disposal — since some sensors have nominal resolutions of up to 200 microns per pixel! This can cause problems when analyzing images at different altitudes which would otherwise show different concentrations of each pollutant at different heights above ground level.

Related Category

FAQ

How to deal with the phenomenon of soot spraying in the nitrogen generator?

The phenomenon of soot spraying of nitrogen generators is also called carbon molecular sieve pulverization, which occurs because the carbon molecular sieve is not tightly pressed or the carbon molecular sieve is loose. Structural faults of the adsorption tower caused ...

Read More

Why do nitrogen systems need regular maintenance?

PSA (pressure swing adsorption) nitrogen generator uses carbon molecular sieve as adsorbent, and uses the principle of pressure adsorption and decompression desorption to adsorb and release oxygen from the air to separate nitrogen. Carbon molecular sieve is a kind of ...

Read More

What are nitrogen and helium used for in aerospace?

Gases that are heavily used in modern rocket and aerospace technology are nitrogen and helium. Their main applications are: 1. As an energy source, it is used to operate various pneumatic valves and components (helium gas should be used to ...

Read More

How to choose a high-quality, durable and cheap nitrogen generator?

1. What suits you is the best 2. High cost performance is the first principle 3. In terms of after-sales service, "in the circle" must have a good reputation. 4. As far as possible, choose a famous brand nitrogen generator ...

Read More

How to extend the service life of nitrogen generator?

Nitrogen generators are used in many industries, such as petrochemical, coal chemical, natural gas chemical, heat treatment, bright annealing, protective heating, green grain storage, food nitrogen-filled packaging, vegetable preservation, wine sealing (canning) and preservation, etc. . If the nitrogen generator ...

Read More

Send Inquiry

Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.

What is 7+4?

Related Products

What is 7+4?