Products
Product Description
Liquid Oxygen Tank
A liquid oxygen tank is a container for storing liquid oxygen.
The principle of liquid oxygen tank
The storage of liquid oxygen must be insulated, so the liquid oxygen tank has an inner tank, an insulation layer (or a vacuum layer), and an outer shell. Although there is an insulation layer, it cannot maintain the temperature of liquid oxygen. The material of the liquid oxygen tank is thinner, much thinner than the oxygen cylinder, so there must be a vent pipe and valve. After deflation, the oxygen takes away the heat to achieve the purpose of heat preservation. This is like boiling water at 100 degrees. But sometimes the heat of liquid oxygen is too little and the pressure in the tank is too low, so there must be a heating circuit and a booster valve. The heating circuit works by liquid oxygen convection, no pump is needed, only the external heat is introduced, and the boiling point of liquid oxygen is -183°C. In this way, the liquid oxygen tank is complicated, and there must be a protective frame, a pressure gauge, etc. The safety valve of the liquid oxygen tank can be closed automatically, but the booster valve cannot be closed automatically, which can be used for pressure regulation.
Classification of liquid oxygen tanks
There are two types of liquid oxygen tanks: vertical liquid oxygen tanks and horizontal liquid oxygen tanks. This liquid oxygen tank is upright and can safely and effectively store large quantities of oxygen.
Liquid oxygen tank for sale
Zhongrui PSA oxygen generator: After the equipment is in normal operation, it only consumes electric energy to maintain the operation of the equipment, and the unit oxygen cost is low, usually about 1.2 yuan/Nm³. PSA oxygen generator uses inexhaustible air as raw material, uses zeolite molecular sieve as adsorbent, uses the principle of pressure swing adsorption, and uses zeolite molecular sieve to selectively adsorb oxygen and nitrogen to separate nitrogen and oxygen. It has the characteristics of simple process flow, microcomputer PLC intelligent control, fast gas production, low energy consumption, online detection of oxygen purity, convenient operation and maintenance, low operating cost, strong device adaptability, etc., and can truly realize unmanned operation and production. PSA oxygen equipment is a one-time investment for permanent gas use, and cost recovery is absolutely achievable.
