90-95% Mobile Container Oxygen Generator
  • 90-95% Mobile Container Oxygen Generator90-95% Mobile Container Oxygen Generator

90-95% Mobile Container Oxygen Generator

According to the principle of variable pressure adsorption, zeolite molecular sieve is used as an adsorbent, due to the selective adsorption property of zeolite molecular sieve, nitrogen in the air is adsorbed by zeolite molecular sieve in large quantities, oxygen is enriched in the gas phase, and the separation of nitrogen and oxygen is realized under the effect of variable pressure adsorption.
Oxygen Capacity: 1-200Nm³/hr
Oxygen Purity: 90-95%
Oxygen Pressure: 0.1-0.5Mpa (150-200Bar Refilling Pressure can be offered)

Send Inquiry

Product Description

90-95% mobile container oxygen generator has a box body, an oxygen storage tank, a muffler, an air compressor, an air storage tank, a cold dryer, and a molecular sieve oxygen-making machine that is successively connected to the box body. The oxygen outlet is connected with the air inlet of the oxygen storage tank, and the air outlet of the oxygen storage tank is connected with the air inlet of the decompression tank. The whole device of the utility model is in a box, which is easy to move. When the air compressor or molecular sieve oxygen generator fails, the air storage tank and the oxygen storage tank can continue to provide air and oxygen. 

 

1.Parameter (Specification) of 90-95% Mobile Container Oxygen Generator

 

Model Capacity Purity
ZRO-3 3Nm³/h 90-95%
ZRO-5 5Nm³/h 90-95%
ZRO-10 10Nm³/h 90-95%
ZRO-20 20Nm³/h 90-95%
ZRO-30 30Nm³/h 90-95%
ZRO-50 50Nm³/h 90-95%
ZRO-100 100Nm³/h 90-95%
ZRO-150 150Nm³/h 90-95%
ZRO-200 200Nm³/h 90-95%

 

PSA 90-95% Mobile Container Oxygen Generator from a China factory uses clean compressed air as raw material and zeolite molecular sieve (ZMS) as adsorbent, to produce oxygen gas with Pressure Swing Adsorption (PSA) technology in average temperature. ZMS is a round granular adsorbent full of micropores inside and outside, which has characteristics of selective adsorption. N2 has a higher diffusion rate while O2 has a lower, therefore N2 is adsorbed into ZMS while O2 is out of it. By controlling the on/off state of the pneumatic valves by PLC, adsorbing under pressure, and regenerating without pressure, to separate nitrogen and oxygen gas, and create a continuous flow of oxygen with required purity.

 

2. Introduction of 90-95% Mobile Container Oxygen Generator

 

90%-95% Oxygen Generator

 

3. Features of 90-95% Mobile Container Oxygen Generator from manufacturer

1) Adopt a human-computer interface and intelligent control to make simple operations and supply qualified oxygen gas quickly.

2) High-efficiency filling technology of molecular sieve, to makes ZMS much tighter, firmer and longer service life.

3) Adopt international famous brands PLC and pneumatic valves, to switch automatically and make operation more stable.

4) Pressure, purity, and flowrate are stable and adjustable and can meet different requirements of customers.

5) Compact structure, nice appearance, and small occupation area.

 

4. Applications of 90-95% Mobile Container Oxygen Generator

1) Sewage treatment: oxygen-enriched aeration for activated sludge, ponds oxygenation, and ozone sterilization.

2) Glass melting: combustion-supporting dissolution, cutting to increase yield and extend the service life of stoves.

3) Pulp bleaching and paper making: changing chlorinated bleaching to oxygen-enriched bleaching with low-cost, sewage treatment.

4) Non-ferrous metal metallurgy: oxygen-enriched smelting of steel, zinc, nickel, lead, etc. PSA technology is gradually taking the place of cryogenic technology.

5) Petrochemical and chemical industry: increasing the reaction speed and chemical production output by adopting oxygen-enriched oxidizing reaction.

6) Ore treatment: use oxygen in gold, etc. production process, to improve precious metal extraction efficiency.

7) Aquaculture: increasing dissolved oxygen in water by oxygen-enriched aeration to vastly improve fish yield, also can use oxygen when transporting lives fish.

8) Fermentation: replacing air with oxygen in fermentation to drastically improve efficiency.

9) Drinking water: providing oxygen to ozone generator from manufacturer for sterilization.

10) Medical: oxygen bar, oxygen therapy, physical health care, etc.

 

Four major performance excellence of 90-95% mobile container oxygen generator.

 

Advanced

A: Using air as raw material, oxygen is produced and tested on-site, oxygen does not need to be transported and tanked, easy to use. Oxygen pressure can be adjusted as needed.

 

B: The compressed air is configured with air purification and drying treatment, clean compressed air raw material, which is conducive to prolonging the service life of the molecular sieve.

 

C: advanced joint control system, PLC touch screen control and display, fully automatic operation, highly intelligent, to achieve the joint operation of multiple units, remote monitoring and management can be implemented. It makes the hospital more equipped with institutionalized, scientific, and modernized oxygen supply management mode, and improves the hospital grade.

 

Safety

PSA technology is to produce oxygen by physical means at room temperature and low pressure, without the link of transportation and sub-assembly, which greatly reduces the hidden safety risks.

 

Economical

A: Using PSA oxygen production, the physical principle, using the surrounding air as raw material, economic and environmental protection, low energy consumption, high efficiency, reduce cost of oxygen per unit, fast investment effect.

 

B: Equipment structure design compact, reduce the floor space. Optimized process flow, more efficient and energy-saving.

 

5.Shipment of 90-95% Mobile Container Oxygen Generator manufacturer

90-95% Mobile Container Oxygen Generator manufacturer

Hot Tags:90-95% Mobile Container Oxygen Generator, Manufacturers, Suppliers, Buy, Customized, Factory, China, Made in China, Price

 

Working principle of advanced 90-95% Mobile Container Oxygen Generator:

Usually, two adsorption towers are used, one tower for adsorption and oxygen production, and one tower for desorption and regeneration. The PLC intelligent program controls the opening and closing of the pneumatic angle seat valve to make the two towers cycle alternately and produce high-quality oxygen continuously.

Send Inquiry
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.

Verify Code